Smart Systems
Home > Solution>Smart Systems>Smart Road Lighting System-Zigbee and LoRa

Smart Road Lighting System-Zigbee and LoRa

TABLE OF CONTENTS

Introduction

The emergence of smart road lighting systems indeed provides a new solution to address the various issues associated with traditional road lighting control methods. Here are some advantages and characteristics of smart road lighting systems to tackle the pain points of traditional lighting control methods:


Energy saving and emission reduction

Utilization of high-efficiency led light sources reduces energy consumption.

Through smart control systems, light brightness and operating hours are adjusted according to actual needs to avoid energy wastage.

 

Cost saving of smart road lighting

Real-time adjustment of light brightness enables precise management, reducing unnecessary energy consumption.

smartmonitoring systems promptly detect road lighting faults, reducing maintenance cycles and costs.

 

Smart road lighting for energy efficiency

Based on actual requirements, smart control systems can turn off or adjust road lighting brightness during unmanned periods, avoiding resource wastage.

Integration of multiple smart sensors on a single lamppost optimizes resource utilization and management efficiency.

What Are The Benefits of Smart Road Lighting?

Automatic adjustment of road lighting brightness based on spatial brightness and real-time weather conditions enhances pedestrian and vehicle safety.

Provision of more convenient urban services, such as smartmonitoring and emergency alarms, enhances the quality of life for city residents.

 

Centralized control monitoring system

Smart road lighting systems feature centralized monitoring, recording, and statistical functions, supporting quantitative management and enabling city managers to conduct remote monitoring and real-time management.

Provision of data analysis capabilities provides scientific basis for urban planning and management.

What is Smart Road Lighting System?

An smart road lighting system is an illumination system based on advanced sensing, control, and communication technologies, aimed at improving energy efficiency, reducing operational costs, enhancing service quality, and raising the level of urban management for road lighting. It achieves smartmonitoring, management, and control of road lights through the integration of various smart sensors, controllers, and communication devices.


ItemsLoRaZIGBEE
Standard/AllianceEEE 802.15.4g,LoRa AllianceEEE 802.15.4,Zigbee Alliance
Frequency band433/470/868/915 MHz470M/868M/915M/2.4 G Hz
Communication distanceLong range,10-15 km ideally
1-5 km urban rare
Node to Node:10 to 100 meters,ideally 150 meters
Communication speed0.2-100 Kbps20-250 Kbps
CostRelatively higher than ZigbeeLower
AdvantagesGood security

Good anti-interference

Low power consumption

Low mainteance
Low speed of communicaton

Max connection 500-1000 node
Long distance
Auto-mesh
High common speed

nterferred by other radio

Max.connections only 255 nodes

Common distance shorter than Lora
DisadvantagesRelatively lower communication speedNot secure as Lora


What Are The Benefits of Improved road Lighting?

Smart Lighting Sensors: Smart road lighting systems are typically equipped with various sensors, such as light sensors, infrared sensors, temperature sensors, etc., capable of sensing environmental factors like light intensity, pedestrian flow, and vehicular traffic.

 

Smart lighting Control: The system employs advanced control algorithms to adjust parameters such as brightness and operating time of road lights based on real-time environmental data, enabling smart energy management.


Smart Management Console: Smart road lighting systems feature remote monitoring and management capabilities, allowing city administrators to monitor the operational status, energy consumption, fault alerts, etc., in real-time through internet platforms or mobile applications, facilitating remote control and adjustment.

 

Data Analysis and Optimization: The system conducts real-time analysis and processing of the gathered data to provide scientific insights for urban planning and management, optimizing road light layout, energy utilization, and city operations.

 

Smart Service Functions: smart road 

lighting systems can integrate various smart service functionalities such as video surveillance, emergency assistance, environmental monitoring, etc., enhancing the safety and convenience of city residents.

Smart Street Lighting System-Zigbee and LoRa


Kinlights is a lighting solution provider. Since its establishment in 2015, as a leading provider of smart road lighting control systems and overall solutions for smart city infrastructure, we have installed over 3 million smart road light controllers in more than 400 cities across 30+ countries worldwide over the past 8 years. Through smart lighting control solutions, we not only reduce energy consumption and operational costs for smart cities but also lay the foundation for digitalization. Our platform integrates wireless remote control for street, commercial, industrial, and solar lighting with smartlamp posts, serving as a bridge to smart cities. It can also expand into various smart city applications such as smart road lighting, smart solar street lighting, and industrial lighting.


How Does Smart Road Lighting Work?

The smart road lighting control system is an innovation and upgrade to traditional street light monitoring technology. It utilizes individual lamp control terminal devices, wireless network transmission channels, and wireless technologies such as Zigbee or LoRa to achieve precise monitoring and remote management of each road light. Below is a brief overview of the system's basic principles and operational workflow.


Hardware Components: Utilizing streetlights or sockets that comply with NEMA or Zhaga standards.


Single Roadlight controller: Installed on each streetlight, responsible for receiving and executing control commands.


Gateway: Installed at required locations to establish wireless network transmission channels and connect to the internet, typically via GPRS/3G/4G/WIFI/Ethernet.


Roadlight Management Platform/Application: Software platform used to monitor and control the entire streetlight system.


Cloud: Stores data, provides remote access, and supports higher-level data processing and analysis.


Software control: Users can remotely monitor and control the entire roadlight system through the streetlight management platform/application.


Users can set and adjust functions such as switching status, brightness adjustment, and group control through the platform.


The platform provides real-time data detection and monitoring, allowing users to view streetlight status, energy consumption, and fault alarm information.


Wireless communication: The gateway communicates with each single luminaire controller using wireless technologies such as Zigbee or LoRa.


Control commands are transmitted from the streetlight management platform to the gateway, which then sends them to the corresponding single luminaire controller.


Upon receiving the command, the single luminaire controller executes the corresponding actions, such as turning lights on/off or adjusting brightness.


Functionality implementation: Capable of implementing smartdimming, scheduled switching, remote monitoring, etc., according to requirements.


Real-time detection of lighting faults and other maintenance issues to enhance reliability and maintenance efficiency of road light.


Through energy-saving dimming and precise control, it enhances energy utilization efficiency and reduces operational costs.


Smart Street Lighting System-Zigbee and LoRa


Additional functions of smart road lighting in urban areas include:


Integrating functions such as air quality detection, noise level monitoring, weather stations, camera systems, and wireless network services into smart road lighting systems is an important part of smart city development. It provides city managers with rich data and service support to improve urban life and environmental quality. Here are the specific applications of these functions in smart road lighting systems:

 

Air Quality Monitoring: Road lights are equipped with air monitoring devices capable of real-time monitoring of emissions such as carbon dioxide and pollutants. Data is transmitted to the control center via Zigbee or LoRa systems, enabling municipal authorities to create maps of high-pollution areas, track changes, and provide analysis for impact studies and intervention measures.

 

Noise Level Monitoring: Road lights are fitted with noise sensors to monitor the sound and noise levels generated by specific noise sources in the city. This data assists municipal authorities in gaining a clear understanding of the city's noise situation and provides support for improving urban planning and management.

 

Weather Stations: Road lights are equipped with weather sensors to monitor atmospheric and weather conditions in real-time, providing information on long-term climate changes and short-term weather events in the city.

 

Camera Systems: Cameras are installed on road lights for video surveillance services, safeguarding public and property safety. These cameras can be used to monitor traffic conditions, road safety, urban crime, and more, providing crucial support for urban security management.

 

Wireless Network Services: Road lights can be installed with wireless network access points, providing residents with high-coverage, stable, and fast internet access services. This shared infrastructure approach reduces network construction costs and enhances the city's level of informationization and residents' quality of life.

 

The multifunctional integration of smart road lighting systems makes them an integral part of smart city development, providing comprehensive support and services for urban management and residents' lives.

Summary

Smart road lighting systems effectively address the pain points of traditional road light control methods by offering advantages in energy saving, cost reduction, optimized resource utilization, enhanced user experience, and centralized monitoring and management. This fosters the modernization of cities and the development of smart city initiatives.

Related Products

Want to Learn More About Our Products?

Feel free to get in touch, and we'll reply to you at the earliest opportunity.

Kinlights is an Outdoor Lighting Manufacturer, Factory, Supplier and Exporter, factory in China, ISO9001, ISO14001, ISO45001 and ISO50001 certified since 2015.

Contact Us

inquiry@kinlights.com

+86 150 147 57085

3rd Floor, Building B1, Xinjianxing Technology Industrial Park, Fengxin Rd, Loucun Commnunity, Xinhu Subdistrict, Guangming District, Shenzhen

Copyright © Shenzhen Kinlights Technology Co., Ltd. All Rights Reserved